'Why won't my Mac turn on?': Troubleshooting tips for any Mac computer that won't start properly

It happened: Your Mac computer refuses to turn back on. Now what?

That all depends on exactly how unresponsive it actually is, and why it isn't responding.

Here are seven troubleshooting tips to help fix a Mac that won't turn on.

Check out the products mentioned in this article:

MacBook Pro (From $1,299 at Apple)

How to fix a Mac that wont turn on

Your Mac may not be turning on, but the reasons behind that differ depending on whether or not you can hear any sounds coming out of it.

Here are tips for those who have completely unresponsive Macs, as well as those who have semi-responsive Macs :

Unresponsive Macs

If you can't get any response (including the usual Apple chime or fan noises), here are a few things that may be keeping your Mac from turning on:

1. Check the charger

It's always a good idea to check that your charging cable is connected to both the power source and your computer.

If so, check that the cable itself is intact or if there are exposed wires or tears. Those may be your culprit.

It's also a good idea to try moving to another outlet (or plugging another device into that same outlet) to see if the outlet is working, in addition to swapping out the charger or adapter.

2. Do a power cycle

A power cycle is essentially a forced restart.

To do this on a MacBook laptop, you'll need to hold down the power button for about 10 seconds. For desktop Macs, unplug the computer for 10 seconds and then plug it back in.

Semi-responsive Macs

If you can hear your Mac make sound, but still can't get it to turn on all the way, here are a few methods that might help fix your issue:

1. Check for a display issue

If you're using a separate monitor with your Mac computer, try unplugging the video cable and plugging it back in. And, again, checking that all of your cables are securely plugged into both their power source and your Mac is always a good idea.

Another thing to check is the brightness settings your brightness could be so low that it makes your screen look like it's off. Press and hold the larger brightness control button (F2) to see if that's the problem.

2. Start up in Safe Mode

Press the power button while holding down the "Shift" key. Release the "Shift" key when you see the login screen. If your Mac starts, be aware that your interface may look different than normal.

turnon Devon Delfino/Business Insider

From that point, you could do some more troubleshooting to get the root cause of your problems. Those might include: Running a scan for viruses, checking your file system and resetting the Parameter RAM, or PRAM.

For more info on how to troubleshoot using Safe Mode, check out our article, " How to start your Mac computer in 'Safe Mode,' to diagnose problems and track down troublesome programs ."

3. Try Recovery Mode

After you hear the Mac startup sound, press and hold "Command" and "R" don't release those until you see the Apple logo appear on your screen. From there, you'll be able to choose from several recovery methods:

Restore from a Time Machine backup (this will only work if you had enabled Time Machine backups beforehand).
Reinstall OS (but keep in mind that you should have backed up your Mac first, otherwise you risk losing your data).
Get help online (through Apple support).
Disk utility (this will repair or erase a disk on your computer).

4. Reset the System Management Controller

The System Management Controller is responsible for many of your Mac's most basic functions, including turning on the screen and responding to button presses.

The way to do this depends on whether you're using a laptop or desktop Mac computer. And if your computer has a T2 Security chip installed this will be most Apple computers made in 2018 or later the steps change again.

Resetting the System Management Controller on a MacBook

If you have a MacBook with a non-removable battery, press and hold the following keys to reset your SMC: Shift + Control + Option + Power button. Hold these down for 10 seconds and then release and hit the Power button one more time.

If you can remove the battery, shut down your computer, remove the battery, and hold down the power button for five seconds. Then put the battery back in and try turning it on.

If you're using a MacBook with the T2 chip, shut down your computer and hold the power button down for 10 seconds. Release it, and wait another few seconds. Then press the power button again to turn it on.

If that doesn't work for your T2 chip MacBook, shut down your Mac and press Shift + left Option + left Control for seven seconds. Then, while still holding those down, press the power button for 7 seconds. Release all the keys and wait a few seconds, then press the power button again to turn on your Mac.

Resetting the System Management Controller on a Mac desktop computer

If you're using a Mac desktop computer, shut down your computer, unplug the power cord for 15 seconds, then plug it back in. Wait five seconds before turning your Mac back on.

If you're using a Mac desktop computer with the T2 chip, shut down your computer and press the power button for 10 seconds. Release it, and wait another few seconds. Then press the power button again to turn it on.

If that doesn't work for your T2 chip desktop computer, shut down your computer, unplug the power cord for 15 seconds, then plug it back in. Wait five seconds before turning your Mac back on.

5. Make an appointment with the Genius Bar

The Apple Genius Bar is a solid place to go if you aren't able to get your Mac to start up, even after troubleshooting. They can help diagnose the issue and help you figure out the appropriate next steps.